User manual BOSCH GSB 12V-35

[. . . ] Read all safety warnings, instructions, illustrations and specifica- Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains- Work area safety U Keep work area clean and well lit. cluttered or dark areas invite accidents. U Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. [. . . ] U Always wait until the power tool has come to a complete stop before placing it down. The application tool can jam and cause you to lose control of the power tool. U In case of damage and improper use of the battery, vapours may be emitted. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system. u The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat. U Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload. There is a risk of explosion and short-circuiting. U Switch the power tool off immediately if the application tool becomes blocked. Be prepared for high torque reactions which cause kickback. The application tool becomes blocked when it becomes jammed in The workpiece or when the power tool becomes overloaded. product Description and Specifications Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury. Please observe the illustrations at the beginning of this operating manual. intended use The power tool is intended for driving and loosening screws and for drilling in wood, metal, ceramic and plastic. The GSB is also designed for impact drilling in brick, masonry and stone. product Features The numbering of the product features refers to the diagram of the power tool on the graphics page. A) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range. Driving application according Typically, the A-weighted noise level of the power tool is Sound pressure level Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-2-1, EN 62841-2-2: Drilling into metal: The vibration level and noise emission value given in these instructions have been measured in accordance with a standardised measuring procedure and may be used to compare power tools. [. . . ] U To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean. after-Sales Service and Application Service Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www. Com The Bosch product use advice team will be happy to help you with any questions about our products and their accessories. [. . . ]