User manual BOSCH GSR 12V-35 FC

[. . . ] Read all safety warnings, instructions, illustrations and specifica- Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains- Work area safety U Keep work area clean and well lit. cluttered or dark areas invite accidents. U Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. [. . . ] u The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat. U Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload. There is a risk of explosion and short-circuiting. product Description and Specifications Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury. Please observe the illustrations at the beginning of this operating manual. intended use The power tool is intended for driving and loosening screws and for drilling in wood, metal and plastic. The power tool can be used with an angle adapter (GFA 12W), off-set angle adapter (GFA 12-E), bit holder adapter (GFA 12-X) or drill chuck adapter (GFA 12-B). product features The numbering of the product features refers to the diagram of the power tool on the graphics page. A) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range. Noise emission values determined according to EN 62841-2-1, EN 62841-2-2. Typically, the A-weighted sound pressure level of the power tool is 73 dB(A). The noise level when working can exceed the volume stated. The vibration level and noise emission value given in these instructions have been measured in accordance with a standardised measuring procedure and may be used to compare power tools. They may also be used for a preliminary estimation of vibration and noise emissions. The stated vibration level and noise emission value represent the main applications of the power tool. However, if the power tool is used for other applications, with different application tools or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period. To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. [. . . ] Do not dispose of power tools and batteries/rechargeable batteries into household waste!Only for EU countries: According to the Directive 2012/19/EU, power tools that are no longer usable, and according to the Directive 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner. Battery packs/batteries: Li-ion: Please observe the notes in the section on transport (see "Transport", page 19). Undgå at bære elværktøjet med fingeren på afbryderen og sørg for, at elværktøjet ikke er tændt, når det sluttes til nettet, da dette øger risikoen for personskader. [. . . ]